Solar power is gradually becoming an energy source that supplements traditional energy supplies and results in energy efficiency, cheaper power bills and a reduction in carbon emissions.
A new air-conditioning system has recently become available in Australia that combines solar power and traditional energy – the Sealey Solar Hybrid Air-Conditioner.
Easy Efficiency is the first distributor of this sustainable air-conditioning system in NSW. Nathan Barton, Director of Easy Efficiency, said he chose to distribute this air-conditioner for a number of reasons:
“This hybrid unit uses half the power of a standard electric air-conditioning system, and as a result emits half the amount of carbon into the atmosphere,” Nathan Barton, said.
The cost of running the unit is also half that of a standard air-conditioning system, and it actually pays for itself in energy savings.
“The Sealey Solar Hybrid Air-conditioner can be used in homes and small to medium businesses and heats and cools. Units have already been nstalled across Australia – from the cooler temperatures of Tasmania to the hot humid temperatures of Far North Queensland.
This new solar hybrid unit has also been quality tested in a number of areas. It has undergone rigorous testing by a division of the SGS Australian laboratories and meets and exceeds all Australian standards. They have achieved the quality management rating: ISO9001 and achieved seven years of the highest ratings.
Designed for commercial and household use, they are built to last and come with a 5-year warranty.
“Their durability is great for the consumer, “ said Nathan Barton, “and it’s also good from a sustainability point of view, as the Sealey unit has a long life expectation.”
Its durability has been achieved by using state-of-the-art technology and quality parts. They include Toshiba compressors, and use inverter technology. This results in power savings, has a longer lifetime, and makes them whisper quiet and ozone friendly.
This article was written for Your Future Home by Lisa Stallard on behalf of Easy Efficiency. More information about the Sealey Solar Hybrid Air-Conditioner can be found at www.easyefficiency.com.au
As a G.J. Gardner Homes master franchise owner, I’m privileged to be in a position where I’m able to influence the standard of sustainability in homebuilding. These days it’s fairly commonplace for people in the residential building market to take an interest in sustainability, but it’s whether you put anything into practice that’s significant.
My own interest in sustainability in the home has grown stronger over my years as a homebuilder and indeed my own home has many energy saving design elements. I believe everyone in business needs to be developing more of a social conscience as the world’s resources are too precious not to.
G.J. Gardner Homes is the leading franchised homebuilder in Australia and we’re aware of the importance of sustainability and the impact it has on our customers and, of course, the environment. We’re spending increasingly more time and money on improving energy-efficiency in the homes we build. Every small improvement we make to the efficiency of a home results in less fossil fuels being released into the atmosphere.
In 2011, G.J. Gardner Homes Victoria/Tasmania and New South Wales were involved in a Government project with Sustainability House where cost-effective construction and design methods to exceed the Government’s six-star rating requirement for newly built houses were identified. During the 12-month project, Sustainability House provided ideas on how to increase the energy rating of multiple five-star home designs including some plans by G.J. Gardner Homes.
There are a number of methods G.J. Gardner Homes tries to adopt to maximise the energy rating of a dwelling. For cooler climates, we are designing homes to include north facing windows with tiled or concrete floors in these areas to absorb the northern sun, increased insulation, double glazing, efficient heating systems and minimal shading to increase sun exposure to the house. For more extreme climates, our homes can include carefully planned shading and eaves, smaller windows to the west and good cross ventilation, while still allowing the winter sun in.
This year, G.J. Gardner Homes has also been working closely with an architect on some prototypes of energy-efficient homes that are far in excess of any Government requirements, with one design coming in at 9.2 stars for a Melbourne location. The end product is set to benefit the homeowner by providing an extremely energy-efficient home that’s cost effective to both heat and cool.
In order for G.J. Gardner Homes to deliver energy-efficient homes at sharper prices, we are also looking to design a high star rating home that will be more cost-effective to build. A lot of people consider the idea of having an energy-efficient home and strive to be environmentally conscious, but at the end of the day when they have to forego the new flat screen or fancy tap ware suddenly they’re not so green or forward thinking.
By continuing to educate our team and by providing the right product for homeowners at the right price, we will slowly but surely improve the standard of sustainability in the homebuilders market. In an industry where there will always be new products and innovation, I’m confident G.J. Gardner Homes will continue to try and lift the bar for the benefit of both our customers and the environment.
Article written for Your Home by Ross Morley. Ross has been in the building industry for over 30 years. Ross set up the first G.J. Gardner Homes franchise outside of Australia in Auckland in 1997 and has been involved in the G.J. Gardner Homes Victoria/Tasmania master franchise since 2000. There are currently 12 franchises across the two states, producing almost 400 homes annually.
Greenwalls, more commonly known as vertical gardens, are popping up throughout the country. Whether it’s an apartment balcony or a four bedroom home, there is always a wall or awkward space that a greenwall can be installed and re-claim a small piece of the built environment. They not only look great and free up space but they are also great for the environment.
Greenwalls are soil-less vertical gardens grown on the surface of built structures and are designed to mimic the growing conditions found where
greenwalls occur in nature.
The most immediate benefit of a greenwall is its incredible beauty. The greenery is literally a living skin, allowing unlimited design opportunities. In Australia alone there are over 5,000 suitable native species that colonise on rocks and trees.
Greenwalls have also been proven to reduce ambient temperature and offer sound and other insulating qualities to a buildings exterior skin. They use reticulated water, generally from grey water recycling. In all they minimise the Urban Heat Island Effect.
Over the past 25 years we have mastered the design and can proudly say that all of our greenwalls use 94 per cent of recycled materials that would otherwise be destined for landfill.
When it comes to maintenance all that greenwalls require is a trim every now and then, otherwise the tailored irrigation system takes over. So if you travel a lot you no longer have to worry about coming back to dead plants.
To date we have greened over 600sqm across Australia, New Zealand and Brasil. We will continue to retro fit greenwalls in residential apartments and homes but our real goal is to work with the large building companies to include the fittings into the building stage of new high rises and homes across Australia.
Article by Mark Paul – Horticulturist and Founder of The Greenwall Company
About our guest blogger: Michael Downie is the General Manager of Philips Lighting Australia and New Zealand.
We can’t survive in modern society without electric lighting. It’s absolutely everywhere we go – in our homes, places of work, the cars we drive and the streets we live on. Lighting is so ubiquitous that most of us don’t even notice it – until it’s not there.
So it may surprise you to learn that lighting consumes nearly 20 percent of all electricity in the world and almost one third of New South Wales and Victoria’s electricity is used in the home, with between seven and nine percent used for lighting.
As such, there has been a big focus on finding alternatives to the humble light globe. After all, we can’t live without light, so we have to find ways to live better with light.
A technology innovation, which has recently made a big step forward for consumers, is LED (Light Emitting Diode). As energy consumption is directly proportional to a globe’s wattage, LEDs use as little as 4 watts, while incandescent globes commonly used around the home typically use between 40 and 100 watts.
The biggest benefit of LED light is that it uses less than 80 percent of the energy used in traditional light bulbs. Using an LED bulb all day is the equivalent of turning an incandescent light globe off for 19 hours of the day. With an average Australian household having 50 light points, that is a significant reduction in energy.
Another plus for LED is that it lasts an extremely long time, much longer than a traditional incandescent globe. Current LED lamps on the market last from 15,000 to 25,000 hours. So not only are you saving on energy bills, but your replacement costs are significantly reduced over the lifetime of the bulb.
Finally, it is very easy to use LED bulbs in any home, as they can be used in existing light sockets. You don’t need to install any special light fittings; just take out your old light bulb and put in the new one – good LED bulbs should come in both bayonet and Edison screw bases, just like traditional light globes do.
The good news for Australian households is that LED lighting is becoming increasingly affordable and more widely available, such as your supermarket. Making the switch to LED is not only good for your energy bill, its good for the environment and as easy as changing a light bulb.
Other ways to reduce energy in your home through lighting
- If you are building or renovating, avoid having to use artificial lighting during the day by installing energy efficient windows and skylights to optimise the use of natural daylight. You don’t need to install huge skylights in order to get the benefits of natural daylight inside
- Use motion sensors on outdoor lights, and set the ‘on’ time to as little as you need
- Use ‘task’ lights, which are efficient table or floor lamps for specific tasks, rather than lighting the whole room to a high level
- Use multiple and two-way light switches where you can, rather than one switch for all the lights in one room. If a room has more than one entrance, install switches at each entrance to make it easier to turn off the lights when leaving the room.
We recently posted a question to LinkedIn groups and setup a poll on twitter. The question was “Who would like to see the Building Code of Australia (BCA) increase energy efficiency to 7 stars for new dwellings?”
We have received some interesting responses and dialogue. Here are some of them: [the posters will remain anonymous]
1. not me. prescriptive design controls are adding dramatically to the cost of construction. there is no substitute for quality, passive design.
2. In theory, Yes. In reality, No. In between, tread with caution. I’ve seen projects easily hit 9-10 stars, whilst I’ve also seen others struggle to get 3-4 stars. I think the rating system is fine as a yard stick, but is still rudimentary, so getting too accurate with it could become a double-edged sword. We are dealing with a system which is based on assumptions, which is why it cannot be applied to Class 3. I, for one, am not comfortable with the current system for accuracy because it assumes that everyone lives in “ideal” world where everyone gets up at the same time, leaves the bedroom and enters the living area at the same time, leaves the house at the same time, comes home at the same time, cooks at the same time, using the same oven settings at the same time, watches TV in the living room (not the bedroom) at the same time, and then finally goes to bed at the same time. Ironically, they can shower, shave and ‘other’ any time of day without any impact. This does not account for families with small children and stay-at-home mums, or shift workers, or SOHO (Sole Operator Home Office) people, or retirees, who could need to sleep in an eastern facing bedroom at 10am in summer with full sun, etc. The model is sound, but fundamentally rudimentary, so trying to get too accurate with it is like asking a747 to land on one of those quaint English country lanes! I commend and admonish Victoria at once for touting the idea of going back to 5 stars, because it is a rudimentary system, but we must continue to improve efficiency. The answer is not in the rating, but in the application of lessons learnt by those involved to create genuinely energy-efficient designs regardless of rating systems. And this comes from desire, exposure and application; not rating systems.
3. In the age of the project builder, design for climate & design for the site seems to be a long forgotten principle of building. I have the occassional client who will ask – “why do I need an energy assessment done – I am putting in an air conditioner”.
4. I believe we are all reaching for the stars – and heading towards all new builds being 10 star rating in the next 3 years (2015?)
5. I am all for it, all our current projects have hit 7-8 stars without many issues and the clients are loving it. We changed our way of thinking and doing things and it has paid off with more enquires and sign ups than ever before. Let’s face it is not hard to get 7 or 8 stars and the client is getting a much more comfortable home and should not need that A/C or gas heater as well as they are using less power to light up the rooms. Prime answer is a client of ours who lives on the coast that gets very cold in winter and also very hot in summer only uses his A/C for the last year a total of 6hrs. I was at his house the other day and it was 2 degs and I was rugged up like no tomorrow and he was walking around in shorts and a tee shirt and the A/C had been on for 1/2hr to take the chill off. Yes it has taken a few more dollars but when explained t the client they jumped on board and they are extremely happy now that they did. The only hurdle that does not help 7 stars to come in is client’s pockets, in a market that is slow at the moment for some builders if this came in I think a lot more builders will be shutting their doors. So do it but do it when the industry is back on the rise otherwise it will make a lot of families very upset, this being the client as they are now not sure if it is right to spend that extra $10 or $20k and then that poor builder who has been around for many years and has to shut his doors because he has no work.
6. The NCC (previously BCA) is moving in this direction, and there is a DCCEE commissioned report prepared by Pitt & Sherry that investigates the cost implcations of increased stringency. Pathway to 2020 for Increased Stringency in New Building Energy Efficiency Standards: Benefit Cost Analysis FINAL REPORT Prepared for: Department of Climate Change and Energy Efficiency Ref: DCCEE 867/2010. Moving to 7 stars as mandatory efficiency for houses is a reasonably cost effective move and can be accomplished with passive design changes. It should result in more individual designs that are done to suit location and aspect. There will be a push by the large building companies to stop this from happening as the build costs increase hence their margins decrease, and the individuality of houses has to be taken into account to suit the topography. This also makes it a bit harder to do the 20 house in an estate that are basically all the same. One issue is the indoor evironment quality of houses may decrease due the the increased stringency resulting in decreased glass and daylight penetration, as well as reduced access to views. The “cookie cutter” approach means houses will be designed for the worst case orientation and not be adjusted to suit the topography or building orientation. It is a difficult balance because we are in danger of focusing on just the energy efficiency, and not the livability of houses, will we end up with highly efficienct house that drive us all insane? Using the energy efficiency and air-conditioned approach the best house to live in is a cave underground, and a mix of fans, light tubes and air-conditioning to make it reasonable to live in, check out the houses in Coober Pedy. But would we all like to live in that style of dwelling?
7. Responding to number 6 above – Some nice thoughts. Some of what you say expands on my last comment (above). The designers have to take all aspects into the design, and preferably using passive design techniques, so that the IEQ is not compromised (or any other concern, such as affordability, etc). I can still see a place for the builders who want to sell several houses off one plan, but instead of selling them all on the same estate, they will need to start looking on a different plane and selling them on the same orientation. So, Floor Plan A is a northern facing home on a southern slope, Floor Plan B is an eastern facing home on flat land, etc. With many larger builders now developing multiple sites, this should be feasible, and will drive the industry in which the smaller players will adapt (as they always do with change). I think if we are going to drive higher and higher in energy efficiency, then we are going to have to change the rating system to remove some of the assumptions to allow for all possible combinations of occupant usage. NatHERS is simple and cheap, but it is not accurate. Perhaps the next generation of rating tools will be able to overcome the limitations based on what industry has learnt in the preceding years. Also, if the ratings get too hard, then people will just revert to DTS as it becomes the lesser of two evils again.
8. Responding to number 7 above – Agreed. With all your comments. Using NatHERS and the other simple programs avaiable don’t allow for individual assessment. I use IES-VE for commercial projects but it is just as easy to use for residential and it allows full optimization. You input all the profiles for use of the buildings, and you can assess these against a standard set or profiles to see what the impacts are. You also get a full energy and green house gas appraisal of each building instead of a star rating. This would allow you to use standard designs and minor adjustment to suit site and other conditions.
9. Responding to number 8 above – That’s right. I’ve also used TAS, as well as IES. Of course, there are others of the same ilk, but alas their price makes them prohibitive. Also, their level of customisation makes them double-edged swords for inexperienced modelers. Then there are others, such as Beaver, Design Builder, etc which are much cheaper, but less versatile. You’re touching on the core of the future when you mention GHG appraisal as opposed to Star Ratings (or Drop Ratings, or Leaf Ratings, or any other dissociated symbol that has connotations of something environmentally ethical). Ultimately, we will have to go back to basics and rely on well-experienced professionals to get the design right to start with, before relying on a computer program to confirm what we already know. (I fear there are too many modelers out there who don’t really fully understand what they are doing, and hence producing erroneous results which they truly believe in.)
10. I agree get the design right – design for sustainability with energy efficient materials. We regularly achieve 8 stars (minimum) and are heading for 9 – without the use of expensive “add on ” solutions. Apart from the regimes used to measure and assess – the RIGHT materials must be used to achieve desired level of performance with out pushing the price point beyond the wider market.I must declare biased to using “insulated structural panels ” even as cladding medium & be integrated into contemporary design today – no need to wait for tomorrow.
11. I think the issue is bringing the existing stock of housing to reasonable energy efficiency. Let’s get everything to six stars before we think about seven.
12. At the risk of sounding bureaucratic sustainability ratings for dwellings should be assessed under the Planning Scheme (where applicable) and not prescribed by just the BCA. It’s at the planning phase of a project that most sustainability benefits can be gained with respect to building orientation and passive solar design. The best that the BCA can do is rate material selections / heat gains and losses through apertures and is therefore limited in its ability to prescribe higher sustainability ratings. At least not without major design changes – which puts you back to the planning phase. In real terms – the current process could significantly add to holding costs and professional fees – especially where a Planning Permit is required – by allowing the sustainability ratings assessment to be undertaken at the later phase of Building Code compliance.
13. I need to ask this question of you all and if it was possible I would love to direct this question to the people upgrading the BCA.
Q If the target is to reach a 7, 8, or 10 star rating on new builds, why not go across the board and force every dwelling that does not comply to say 5 or 6 star rating to catch up? There is no basis for either. Do you think there is an improvement in energy efficiencies and sustainability? Personally I believe so. There is no economic responsibility to local employment when suppliers quite easily now import from Asia and charge as much as the local goods. So sacrifice the local market and work force, increase bottom lines by purchasing overseas and get your 10 star rating. This is simply one aspect. And as for getting the design right let me go a step further, when planning subdivisions the block orientation should be the first consideration not how many lots can we get out of a subdivision. This would make designing a home a little simpler because you dont have to deal with the orientation. If th is so critical why not take away choice and provide one model that can increase in size without changing the variables and then it will always be right according to the codes. Why not do away with fencelines and build each house next to the other this will increase the thermal mass it may not look good but it is not about looking good it’s about achieving the “STAR RATING”. At some point someone is going to have to sit down and put a price on this and it can not be a ficticious value to the consumer. (Someone is bound to hit me with the environment dilemma here. I am all for the environment and doing the right thing. [TURN YOUR HIGH POWERED TELEVISIONS OFF. YOU WANT TO SEE SPORT GO AND WATCH THEM LIVE]. Perhaps this is to harsh of me. Band aid solutions, I am totally against. Fix the problem totally. Household technology is inefficient why not ban the import of or manufacturing of household goods that do not comply as part of the solution? Where is the BCA now? Here is one for the learn-ed. Update the education system so that it abolishes the old building technologies and only teaches the new technologies. Have refresher coarses where it is mandetory for us to go back and get re-educated. I can go on and on and on. Yes I am a builder, I build other people’s designs based on clients budgets. I dont build in the lower end markets because it is depressing when you see clients that want the Aussie dream home but cant quite make it. So now the BCA is to put another squeeze on.
Selfishness utter selfishness. This is not the Australia I know. The boffins writting policy need to wake up and get with the program.
THIS IS NOT ON. THERE ARE BETTER WAYS.
14. I ask you all this. Do any of you have children at the age of 15 to 18? Consider which state you live in which town how much is real estate now. Now consider when your children reach 24 or 25 and want to consider buying a house. Will they be able to afford it? Now if your children are under 15 I will put it to you another way is your home big enough for your children to live in it when they are 24 or 25? Some may say, I havent got a clue about what I am saying. For that say that do not have a heart for the low social order because they are not in that order.
The reality is it is unsustainable for us to continue this way. Is rent affordable in the city you live in?
15. Just a comment on the use of imported products and doing it cheaply out of China, I have worked on a couple China based projects with China based project teams, and have found that Chinese contractors do not have the same level of compliance for sustainable design, even when it is a target on a project. Product out of China is generally not certified to meet Australian Standards and in most cases does not meet the test requirements, particularly for fire rating and thermal performance of prefabricated items, unless the contractor is very, very careful and does a large amount of quality assurance in China during the construction process the products do not gerenally match the specifications for the project. On the projects I have worked on this has resulted in increased costs to the builder, above normal due to the rework required.
Substitution of product with alternative untested product does occur, even the company stamp is replicated and when investigated with the actual product supplier it has been found they did not supply the product to the project it is a copy. On your other point on the costs of housing, the long term costs associated with using the inferior products is unknown, but if you consider the economic costs to society of Asbestos, you will have to agree that the regulation will benefit our children in the future. I have children under 10 and the best way I know of making sure they can afford a home in the future is for them to have one that has very low running costs, as you will find that in the future, as now, that running costs will be the main driver of the cost of home ownership, not the initial capital cost. Increasing regulation and stringency that we need now is for the future of our children to ensure they can afford to own a home. Innovation, new products better building technologies, more efficiency in manufacturing and construction, these are all the outcomes of the increased requirements. We have the opportunity to innovate and get better at what we do, if fact we need to do it all better to reduce costs, that is the real outcome of the drive of the BCA, that is where the BCA is at now.
On the twitter poll: 54% of respondants said they would like to see the BCA increase to 7 stars. 23% said no. 23% said they would to see it increased to 8 stars.
RESULTS ARE NOW AVAILABLE!
Click HERE to see who made it to the Your Future Home Top 50 Sustainable Bulding Leaders.